Wall plates and inserts

Will six modules fit in a single-gang plate?

Compare the plate’s opening count with the width and depth of the actual modules. Bulky shielded jacks, adapters and cable bends can compete for room behind a densely populated plate. Try the intended combination before ordering the same arrangement for an entire floor.

Which parts are purchased separately?

A blank plate can cover an unused box. A keystone plate provides openings and normally needs matching modules or blank inserts where appropriate. List plate, modules, box or bracket and labels separately so the installer can complete and identify every outlet.

Can a photo help match an existing finish?

Use a photo to identify the layout and take a spare plate or exact finish code when color matters. Lighting can make white, ivory and light almond look similar on screen. Verify the opening type and gang size as well so an attractive color match also accepts the required modules.

Finish the plate for the next tenant as well as this one

An office wall may have one active network lead and two positions reserved for future use. Decide whether you need a blank cover, an empty multi-port faceplate or a plate with actual connectors already fitted. The 200-258WH is a white blank cover. It cannot provide a network connection by itself. Check the mounting arrangement, opening count, insert family and depth for rear cables. Label used openings and identify spare routes on the records. If a room layout changes, the next installer can determine what is already connected without removing every plate to inspect it.

Which plate fits a renovation where the device already exists?

Take a front photograph and, with permission from the site installer, confirm the existing mounting format and insert dimensions. A standard plate with modular openings, a decorator-style insert and a plate with a fixed telephone jack are different components. Part 300-204WH is described as a two-line telephone wall plate, while 301-1005 is a blank decorator insert. Choose based on what has to remain connected behind the face after the renovation. Also check whether the finishing trim, mounting screws or separate frame are included. If a wall carries two adjacent devices, note their spacing and the required number of positions. Match color after resolving the physical format. A perfect shade of white is little help when the outer plate fits the wall box but its opening cannot accept the insert already attached to the cable.

Compare parts for your setup